Aeg-Electrolux FAV86080VI Manuel d'utilisateur télécharger pdf (Page 27)

Starting a dishwashing cycle

1. Check that the spray arms can turn freely.

2. Turn the water tap on fully.

3. Press the ON/OFF button.

4. Select the desired cycle.

The programme indicator comes on. The remaining time expected for

the cycle will be shown in the multi-display.

3 During the dishwashing cycle, the remaining time shown in the multi-

display may be adjusted according to the size of the load, degree of

soiling, etc.

5. Close the door. The dishwashing cycle will begin.

A light signal in the form of a dot appears at floor level.

3 If the dishwasher is built in at high level with flush fitting cupboard

doors, the light signal cannot be seen.

The dot shaped light signal is not dangerous. (It is not a laser.) It lights

up while a dishwasher cycle is running and goes out when the cycle

ends.

Interrupting or aborting a dishwashing cycle

Only interrupt a dishwashing cycle that is in progress if it is absolutely

necessary.

Interrupting the dishwashing programme by opening the dishwash-

er door

1 Hot steam may escape when the door is opened. There is a risk of scald-

ing.

1. Open the door carefully. The dishwashing cycle will stop.

2. Close the door. The cycle will continue.

Aborting the dishwashing cycle

1. Press function buttons 2 and 3 and keep them pressed.

The LED indicators of all the programme buttons that can be selected

light up.

2. Release the function buttons. The dishwashing cycle has been can-

celled.

3. If you want to start a new cycle, check whether there is any detergent

in the dispenser.

4. Switch off using the ON/OFF button.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Pas de commentaire

Aeg-Electrolux FAV86080VI Manuel d'utilisateur Page 27