LAVAMAT LS 70840 - LS 72840ENWASHING MACHINE USER MANUAL
This function remains able also when the washing machine is not working.To enable (or disable) this option press simultaneously for about 6 seconds bu
2. If required, pour fabric softener into thecompartment marked (the amountused must not exceed the MAX mark inthe drawer). Close the drawer gently.T
Press this button repeatedly to change the spin speed, if you want your laundry to be spunat a speed different from the one proposed by the washing ma
STAIN optionSelect this option to treat heavily soiled or stained laundry with stain remover (extendedmain wash with time optimized stain action phase
Select the DELAY START (button 8)Before you start the programme, if you wish to delay the start, press the button repeated-ly, to select the desired d
Opening the door after the programme has startedWhen the machine is working and throughout the delay time the door is locked. If, for anyreason, you w
WASHING PROGRAMMESProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Fabrics LoadType of LaundryOptions1)DetergentCompartmentХЛОПОК95°-
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Fabrics LoadType of LaundryOptions1)DetergentCompartmentСИНТЕТИКА60°- ColdMain wash -
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Fabrics LoadType of LaundryOptions1)DetergentCompartmentСЛИВDraining of waterMax. loa
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Fabrics LoadType of LaundryOptions1)DetergentCompartmentШЕЛК(HANDWASH) 30° - ColdMain
FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Fabrics LoadType of LaundryOptions1)DetergentCompartmentХЛОПОК ЭКО60°Main wash - Rins
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dabthe stain with the fingertips and a cotton cloth.Rust: oxalic a
• large amounts of foam form during washing.Degrees of water hardnessWater hardness is classified in so-called “degrees” of hardness. Information on h
1.Remove the drawer by pressing thecatch downwards and by pulling it out.Flush it out under a tap, to remove anytraces of accumulated powder.2.To aid
3. Open the pump door.4. Place a container close to the pump to collect any spillage.5. Release the emergency emptying hose, place it in the container
8. Put the cap back on the emergencyemptying hose and place the latter backin its seat.9. Screw the pump fully in.10. Close the pump door.WARNING!When
5. Unscrew the hose from the machine.Keep a rug nearby because some watermay flow.6. Clean the filter in the valve with a stiffbrush or with the piece
2. place the end of the emergency emptying hose and that of the inlet hose in a bowlplaced on the floor and let water drain out;3. screw the water inl
Problem Possible cause/SolutionThe washing machine does not start:The door has not been closed. • Close the door firmly.The plug is not properly inser
Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent(creates too much foam) has been used.• Reduce th
CONTENTS4 Safety information6 Product description7 Control panel9 First use9 Personalization10 Daily use16 Washing programmes20 Helpful hints and tips
Problem Possible cause/SolutionThe machine vibrates or is noisy:The transit bolts and packing have not been re-moved.• Check the correct installation
If you are unable to identify or solve the problem,contact our service centre. Before telephoning,make a note of the model, serial number and pur-chas
Programme Energy consumption(KWh)Water consumption(litres)Programme duration(Minutes)Wool/ Handwash 30° 0.28 421) «Cottons Eco» at 60°C with a load of
2. Remove the power supply cable and thedraining and inlet hose from the hoseholders on the rear of the appliance.3. Unscrew the three bolts with the
5. Fill the smaller upper hole and the twolarge ones with the corresponding plas-tic plug caps supplied in the bag con-taining the instruction booklet
1. Open the porthole and extract the inlethose.2. Connect the hose with the angled con-nection to the machine.Do not place the inlet hose downwards.An
Water-stop deviceThe inlet hose is provided with a water stop de-vice, which protects against damage caused bywater leaks in the hose which could deve
The drain hose may be extended to a maximum of 4 metres. An additional drain hose andjoining piece is available from your local Service Centre.ELECTRI
Packaging materialsThe materials marked with the symbol are recyclable.>PE<=polyethylene>PS<=polystyrene>PP<=polypropyleneThis mea
39
SAFETY INFORMATIONRead carefully & keep for future reference.• The safety of Your appliance complies with the industry standards and with legal r
www.aeg.com/shop 132957752 -A-262011
• After having installed the appliance, check that it is not standing on the inlet and drainhose and the worktop is not pressing the electrical supply
• Make sure that children or pets do not climbinside the drum. To prevent children or petsbecoming trapped inside the drum the ma-chine incorporates a
Detergent dispenser drawer Compartment for prewash phase or stain re-mover.The prewash detergent is added at the beginningof the wash programme.The st
8 DELAY START button (ОТСРОЧКА СТАРТА)9 DisplaySymbols: Handwash; Child Lock.DISPLAY9.1 9.29.4 9.5 9.6 9.7 9.89.3 9.99.1 - Temperature indicator and C
– The selected delay (20 hours max) set by means of the relevant button appears on thedisplay for about 3 seconds (for example ’), then the duration
Commentaires sur ces manuels