Aeg-Electrolux F65080VI Manuel d'utilisateur télécharger pdf (Page 22)

In daily use22

Starting a dishwashing cycle

1. Check that the spray arms can turn freely.

2. Turn the water tap on fully.

3. Press the ON/OFF button.

4. Select the desired cycle.

The programme indicator comes on. The remaining time expected for the cycle

will be shown in the multidisplay.

3 During the dishwashing cycle, the remaining time shown in the multidisplay

may be adjusted according to the size of the load, degree of soiling, etc.

5. Close the door. The dishwashing cycle will begin.

A light signal in the form of a dot appears at floor level.

3 If the dishwasher is built in at high level with flush fitting cupboard doors

around it, the light signal cannot be seen.

The dot shaped light signal is not dangerous. (It is not a laser.) It lights up while

a dishwasher cycle is running and goes out when the cycle ends.

Interrupting or Cancelling a dishwashing cycle

Interrupt a dishwashing cycle that is in progress if it is absolutely necessary.

Interrupting the dishwashing programme by opening the dishwasher door

1 Hot steam may escape when the door is opened. There is a risk of scalding.

1. Open the door carefully. The dishwashing cycle will stop.

2. Close the door. The cycle will continue.

Cancelling the wash programme

1. Press function buttons 2 and 3 and hold them down.

The LED indicators of all the programme buttons that can be selected will illumi

nate.

2. Release the function buttons. The wash programme has been cancelled.

3. If you want to start a new wash programme, check whether there is any deter

gent in the dispenser.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Pas de commentaire

Aeg-Electrolux F65080VI Manuel d'utilisateur Page 22