Aeg-Electrolux T56740 Manuel d'utilisateur télécharger pdf (Page 22)

2. Pour condensed water out into a ba-

sin or similar receptacle.

3. Slide outlet connections in and refit

condensate tank.

If the programme has been interrup-

ted as a result of the condensate tank

being full: Press the START PAUSE

button to continue the drying cycle.

The condensate tank has a volume of approx. 4 litres. This is sufficient for around

7kg of laundry which has previously been spun at 1000 revolutions/ minute.

The condensate can be used as distilled water, e.g. for steam ironing. However first

filter the condensate (e.g. with a coffee filter) to remove any residue and small

pieces of fluff.

Cleaning heat exchanger

If the warning led is lighting, the heat exchanger needs to be cleaned.

CAUTION!

Operating when the heat exchanger is blocked with fluff can damage the dryer.

This also increases energy consumption.

1. Open door.

2. Open door in plinth. To do this, press

the release button on the bottom of

the door aperture and open the door

in the plinth to the left.

3. Clean fluff from the inside of the

door and the heat exchanger front

chamber. Wipe the door seal with a

damp cloth.

Care and cleaning

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Pas de commentaire

Aeg-Electrolux T56740 Manuel d'utilisateur Page 22