Aeg-Electrolux T56740 Manuel d'utilisateur télécharger pdf (Page 20)

5. Take out fine strainer.

6. Remove fluff from fine strainer. It

is best to use a damp hand for this

purpose.

Clean the entire filter area

The strainer area does not have to

be cleaned after every drying cycle,

but should be checked regularly

and cleaned of fluff if necessary.

7. To do this, grip the top of the large mesh filter and pull it forwards until it

comes loose from the two brackets.

8. Remove fluff from the entire filter

area. It is best to use a vacuum

cleaner for this purpose.

9. Press both journals of the large

mesh filter into the brackets on the

loading door until they snap into

place.

10. Re-insert fine strainer.

11. Press against the large mesh filter

until it locks into the interlock.

If the fine strainer is not fitted, the large mesh

filter will not snap into place and the loading

door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has

finished.

Care and cleaning

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 36 37

Pas de commentaire

Aeg-Electrolux T56740 Manuel d'utilisateur Page 20