Aeg-Electrolux F44860 Manuel d'utilisateur télécharger pdf (Page 12)

Operating instructionsv

b)Setting electronically

(The dishwasher must be switched off)

NOTE: the electronic setting of the water softener is possible ONLY

with the 3 in 1 function deactivated.

The dishwasher is factory set at level 5.

1. Press the On/Off button. All programme selection buttons indicator

lights will illuminate (setting mode).

If only one programme selection button indicator light is

illuminated, this means that a washing programme has been set.

The programme must be cancelled: press simultaneously the

function buttons 2 and 3 for about 2 seconds, the indicator light

of the set programme button starts flashing for about 2 seconds.

After about 2 seconds the indicator lights of all the programme

selection buttons will illuminate indicating that the set

programme has been cancelled and that the machine is now in

setting mode.

2. Press simultaneously function buttons 2 and 3, until the indicator

lights of the function buttons 1, 2 and 3 start flashing.

3. Press the function button 1, the indicator lights of function

buttons 2 and 3 turn off while the indicator light of the button 1

goes on flashing, the digital display indicates the current level.

Example:

= level 5.

4. To change the level, press button 1. Each time the button is pressed

the level changes. (For the selection of the new level see the chart).

Examples:

if the current level is 5, by pressing button 1 once, level 6 is

selected.

if the current level is 10, by pressing button 1 once, level 1 is

selected.

5. To memorise the operation, switch off the dishwasher by pressing

the On/Off button or wait about 60 seconds after which the

dishwasher will automatically return to setting mode.

152959 47/2en 2-05-2007 12:15 Pagina 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Pas de commentaire

Aeg-Electrolux F44860 Manuel d'utilisateur Page 12