Aeg-Electrolux F44860 Manuel d'utilisateur télécharger pdf (Page 26)

Operating instructions

Starting a washing programme

1. Check that the baskets have been loaded

correctly and that the spray arms can rotate

freely

2. Turn on the water tap

3. Close the dishwasher door

4. Press the On/Off button

All the indicator lights of the programme selection buttons

illuminate.

5. Setting and starting the programme

To select a programme, press the programme button of the desired

washing programme (see “Washing programmes” chart).

The corresponding indicator light remains illuminated while the

other programme buttons indicator lights turn off.

In the digital display flashes the running time (in minutes) of the

selected programme.

The programme in progress indicator light illuminates.

After about 3 seconds from the last pressure of a button the

programme starts automatically.

In the digital display the running time of the programme is no

longer flashing and the programme in progress indicator light

remains illuminated.

Setting and starting the programme with the delay start

The setting of the delay start occurs before selecting the

programme

Press the delay start button until the flashing number of the hours

for the delay start will appear in the digital display (from 1h

to 19h).

Select a washing programme. In the digital display will appear, for

a moment, the running time of the programme and then again

appears the selected delay start time.

As soon as the number of hours is displayed without flashing, the

countdown for the delay start is active.

The countdown will decrease with steps of 1 hour.

152959 47/2en 2-05-2007 12:15 Pagina 26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Pas de commentaire

Aeg-Electrolux F44860 Manuel d'utilisateur Page 26