Aeg-Electrolux F60860 Manuel d'utilisateur télécharger pdf (Page 41)

Electrical connection

Safety standards require the appliance to be earthed.

Prior to using the appliance for the first time, ensure that the rated voltage and

type of supply on the rating plate match that of the supply where the

appliance is to be installed. The fuse rating is also to be found on the rating

plate.

Always plug the mains plug into a correctly installed shockproof socket.

Multi-way plugs, connectors and extension cables must not be used. This could

constitute a fire hazard through overheating.

If necessary, have the domestic wiring system socket replaced. In case that the

electrical cable has to be replaced, contact your local Service Force centre.

The plug must be accessible after the appliance has been installed.

Never unplug the appliance by pulling on the cable. Always pull the plug.

The manufacturer accepts no liability for failure to observe the above safety

precautions.

Installation

117987710en_aus.qxp 5/9/2007 5:17 PM Pagina 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Aeg-Electrolux F60860 Manuel d'utilisateur Page 41