Aeg-Electrolux F88080IM Manuel d'utilisateur télécharger pdf (Page 33)

33In daily use

Interrupting or aborting a dishwashing cycle

Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary.

Interrupting the dishwashing programme by opening the dishwasher door

1 Hot steam may escape when the door is opened. There is a risk of scalding.

1. Open the door carefully. The dishwashing cycle will stop, in the display: PLEASE

CLOSE DOOR

2. Close the door. The cycle will continue.

Aborting the dishwashing cycle

1. Press the RESET button.

In the display: CONFIRM CANCEL ?

2. Press the OK/START button.

The programme is cancelled. In the display: CHOOSE PROGRAMME

3. If you want to start a new dishwashing cycle, check whether there is any deter

gent in the dispenser.

3 Turning off the dishwasher will only interrupt a selected dishwashing cycle, not

cancel it. The cycle will recommence after turning the dishwasher back on again.

Setting the delay start

3 With the delay start you can delay the start of a dishwashing cycle for

between 1 and 19 hours. First of all set the delay start and then the desired dish

washing cycle.

1. Go to the DELAY START option; see section “Adapting an option/setting”.

2. Set the period by which you wish to delay the start in hours.

In the symbol line of the display .

3. Press the OPTION button, to change to the Programmes menu.

4. Select programme and start.

First of all the preset time delay until the start runs down. In the display you see

the time remaining until the start of the dishwashing cycle. After the time delay

until the start has elapsed, the dishwashing cycle starts automatically, the

symbol goes out.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Pas de commentaire

Aeg-Electrolux F88080IM Manuel d'utilisateur Page 33