Aeg-Electrolux L74825 Manuel d'utilisateur

LAVAMAT 74825Washing MachineUser information

10Before the first wash1. Open the detergent drawer.2. Pour approx. 2 litres of water through the detergent drawer into the washing machine. This clos

11Running a wash cycleOpening the door/loading washing1. Open the door: pull the handle on the door.When the appliance is switched on, the DOOR and ST

12hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area.1. Pull out the detergent dra

13Changing the spin speed/selecting rinse holdThe washing machine suggests the maximum permitted spin speed suitable for the selected pro-gramme. You

14PRE WASHWarm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without inter-mediat

15Starting a programme1. Check that the tap is turned on.2. Select a programme.3. Press the START/PAUSE button. The programme is started, or will star

16End of the wash cycle/removing the washingAt the end of the programme, END lights up on the programme progress display. The door can be opened as so

17Child safety deviceIf the child safety device has been activated, the door can no longer be shut.Activating the child safety device:Use a coin to tu

18Detergent dispenser drawerThe detergent dispenser drawer should be cleaned regularly.1. Remove the detergent dispenser drawer by pulling it firmly.2

19What to do if...Remedying small faults yourselfIf during use of the appliance one of the following error codes is shown in the multi-display:– E10 (

2Dear Customer,Please read this user information carefully and keep it to refer to later.Please pass the user information on to any future owner of th

20The washing machine vibrates when operating or is not stable.The transport lock has not been removed.Removing the transport lock.The screw feet not

21If the wash result is not satisfactoryThe washing is grey and there are limescale deposits in the drum• Too little detergent was used.• An incorrect

22Carrying out an emergency drain1 Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from th

23Drain pumpThe drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pum

24Disposal2Packaging materialThe packaging materials are environmentally friendly and can be recy-cled. The plastic components are identified by marki

25Technical data5This appliance conforms with the following EU Directives:– 73/23/EEC dated 19.02.1973 Low Voltage Directive– 89/336/EEC dated 03.05.1

26Installation and connection instructions1 Safety information concerning installation• This washing machine cannot be built-in.• Before using for the

27Installing the applianceTransporting the appliance1 Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when liftin

282. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.3. With a suitable spanner unscrew and rem

295. Remove the bracket D.6. Tighten up the six smaller bolts C.7. Open the porthole and remove the polystyrene block fitted with the ad-hesive tape o

3ContentsOperating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Safety . . . . . . . . . . . . . . . . . . .

30Connect the water inlet hose as described under the paragraph “Water inlet”.Where to installImportant! The washing machine must not be operated in a

31Electrical ConnectionAny electrical work required to install this appliance should be carried out by a qualified electrician or competent person.1 W

32Permanent ConnectionIn the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electr

33Water inletAttention!• An inlet hose is supplied and can be found inside the machine drum.• Do not use the hose from your previous machine to connec

34When discharging into a stand-pipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.6’’) a

35Guarantee/Customer ServiceGreat BritainStandard guarantee conditionsWe, AEG, undertake that if within 12 months of the date of the purchase this AEG

36European Guaranteewww.electrolux.comThis appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for

37Magyarország +36 1 252 1773H-1142 Budapest XIV, Erzsébet királyné útja 87Nederland +31 17 24 68 300Vennootsweg 1, 2404 CG -Alphen aan den RijnNorge

38

39Service and Spare PartsIf the event of your appliance requiring service, or if you wish to pur-chase spare parts, please contact Service Force by te

4Installation and connection instructions. . . . . . . . . . . . . . . . . 26Safety information concerning installation . . . . . . . . . . . . . . .

www.electrolux.comwww.aeg-electrolux.co.uk132 977 190-01-180806-00 Subject to change without notice

5Operating Instructions1 SafetyPrior to using the appliance for the first time• Follow the “Installation and connection instructions”.• If the applian

6General safety• Repairs to the washing machine may only be carried out by qualified/authorised service engineers. • Never use the appliance when the

7Description of the appliance Control panel Detergent dispenserdrawerScrew feet (height adjustable)Plinth flap/Drain pumpRating plate(behind door)Cont

8Programme overviewProgrammemax. load 1) (dry washing) 1) A 10 litre bucket contains approx. 2.5 kg dry washing (cotton)Additional programmes Spin spe

9Application/FeaturesCaresymbols1) 1) The figures in the care symbols indicate the maximum temperatures.Energy-saving programme which washes at 60 °C